-
4개의 격리된 디지털 입력(Dry contacts) 또는 임펄스(NPN, PNP)로 UHLIS 0040T0을 통해 4개 모두를 유연하게 구성할 수 있습니다
모드버스 RTU 연결을 통한 상태 전송 또는 임펄스 카운팅을 위한 입력. UHLIS 0040T0는 5년이 보장됩니다
Presentation
4개의 격리된 디지털 입력(Dry contacts) 또는 임펄스(NPN, PNP)로 UHLIS 0040T0을 통해 4개 모두를 유연하게 구성할 수 있습니다
모드버스 RTU 연결을 통한 상태 전송 또는 임펄스 카운팅을 위한 입력. UHLIS 0040T0는 5년이 보장됩니다
|
Inputs |
Functioning mode |
Counting direction |
Scale factor value |
Counter reset value |
|
Counting |
Increasing |
1.0 |
0.0 |
|
|
Alarms thresold mode |
Alarm 1 thresold |
Alarm 1 thresold |
|
|
|
Unused |
0.0 |
0.0 |
|
|
|
Functions |
Function performed |
Operand A |
Operand B |
Operand C |
|
Unused |
Input 1 |
Input 1 |
Input 1 |
- Inputs – Communication
- Input gauges
|
Input |
4 digital inputs: NPN, PNP, dry contacts Acceptable voltage range 0-24V Vil: 2V ; Vih: 10V |
|
Sensor supply |
2 wires sensor 24V ; 41mA max |
|
Communication |
Isolated USB front panel / Isolated RS485 Modbus RTU |
- Characteristics
|
Input characteristics |
|
|
Current input impedance |
> 4.7 kΩ Active state >11 MΩ Passive state |
|
Isolation |
|
|
Supply / Inputs-Communication |
4200Vrms, 50Hz,1mn |
|
Input x / Input y / USB-RS485 |
2500Vrms, 50Hz,1mn |
|
USB / RS485 |
Without |
|
Auxiliary source |
|
|
Voltage supply |
22-240Vdc or 90-230Vac 50/60Hz |
|
General characteristics |
|
|
Max frequency of counting / of a digital signal |
Counting max frequency: 1 channel: 2.4 kHz ; 2 channels: 2.2 kHz ; 3 channels: 2 kHz ; 4 channels: 1.8 kHz |
|
Maximum of consumption |
<5 VA |
|
Operating temperature |
-10°C … +60°C |
|
Storage temperature |
-25°C … +80°C |
|
Relative humidity |
<95% HR (non-condensing) |
|
Protection factor |
IP20 |
- Functions
|
Display functions |
|
|
LED indicators |
4 red LEDs light up or down depending on the state of the input 1 LED indicates that a communication is in progress (USB or RS485) |
|
Programming |
Programming via USB with IXLOG software |
|
Smart functions |
|
|
Calculation mode |
Functions configurable: A+B, A+B+C, A+B+C+D, A-B, A/B, (A-B)/A |
|
Memorization of Digital input states |
Copy status of digital inputs to bits for transmission via Modbus |
|
Counter input |
Counting direction: increase, decrease Possibility to enter a multiplier factor on the value of each input Possibility to define 2 alarm thresholds per channel Possibility to reload the counter with an initialization value set when the second threshold is exceeded Reloading a counter with an initialization value by setting a bit |
|
Links and communication |
|
|
RS485 MODBUS RTU |
RS485 MODBUS RTU bidirectional digital link allowing to: recover the measurements and transmit them in digital format configure and control the device |
|
USB front |
USB front panel to connect directly to the USB port of a PC for programming via the IXLOG software |
Model | Function | ||
|---|---|---|---|
Input | Output | ||
Power | Accuracy | ||
Display | Response Time | ||
Front Adjustment | Weight | ||
Mounting | Dimensions(mm) | ||