Archive

Square root extractor Converting DC input signal into an isolated square root output signal. Various 2-wire transmitters application. Square root extractor application (4-20mA) Contains linearizer circuit. 1 or 2 outputs are...

Signal selector Providing one selected output signal from two input signal in isolated condition. High-density mounting Isolation between the control room and field instrumentation. Contains overvoltage protection circuit. Transformer isolation type. ...

High/Low selector   SHN-SHL is accepting 2 input signal and provides the selected high or low isolated output signal. Selecting higher flow, pressure, etc., for control. Contains overvoltage protection circuit. Transformer isolation type. ...

Sample holder SHN-SHC is designed for holding and transmitting the proportional to input signal in isolated condition. Hold mode : The outputs will be held at the point of this mode...

Reverse transmitter SHN-RVS is in use of providing the isolation and reverses DC signal output proportional to the input signal. Matching a manipulating signal with the valve action. 1 or 2...

RTD transmitter SHN-RTD is designed for converting the input signal that receives from RTD temperature sensor into isolated process signal. Long distance transmission between the RTD and the transmitter. Contains linearizer...

Potentiometer transmitter SHN-PMC is designed for converting the input signal that receives from potentiometer’s sensor into process signal. Tank leveling. Positioning. 1 or 2 outputs are available from 1 input. Contains...

Peak holder SHN-PHC is designed for holding and transmitting the proportional to input signal in isolated condition. Hold mode : Responds only to an increasing signal, holding the maximum value until a...

Power supply SHN-PDB is used to supply power to the field transmitter. Shortcircuit protection. Non-isolated current loop power supply. Various 2-wire transmitters. High-density mounting. Selecting power voltage AC110V/220V converting S/W is...